Talking about a router, whether we mount it in the table or use freehand, in a workshop, is definitely a helpful power device because with just it, we can do many different wood-making jobs. However, in turns, such a wood cutter with dizzying speed can cause some dangers and injuries unless you follow those top tips in safe practices.
The stock should be kept safety
If you choose to utilize a router freehand, you should ensure that you have clamped down the workpiece safely to your table or bench. But, with those workpieces that are a bit large for instance the heavy furniture or cabinets to put on their own. Prior to clamping, you should put a friction mat on the work table or bench, which is able to avoid shifting during the work process. If the routing boards are so narrow that you cannot clamp, the tip here to hold the strip stable is to utilize the traditional-style bench dogs along with the end vise
Watch out your hand
Always keep an eye on your hands and make sure they are safe enough so as not to meet any dangers because this is the part of your body usually directly work with the router. Remember that serious accident can have occurred just in a snap second. When using a router freehand, you should avoid using your naked hands to hold the workpieces. Let’s select the router table with the guard covering the part right above the bit to ensure the best safety for the handyman. For those workpieces which are narrow or small, you should choose to utilize a push block or stick to push them past the bit to make sure your hands are out of the dangerous way. Another tip is to use a feather board; however, the cut quality is only improved through holding the workpieces in the correct place while being cut.
Prior to adjustment, the router should be unplugged
You should keep in mind this advice to always turn off the electricity power if you want to change bits, mount a fence or service the router. By the way, always ensure that the on – off switch is off prior to plugging the router back in.
Remember to put the safety gears on:
During work process, a router can release the noisy sound in addition to churning out the fine cloud of dust with alarming speed as well as hurling chips. From that point, it is essential for you to wear ear, eye and dirt security every time you start to rout any workpieces. The tip here is to choose a dust mask which is able to connect to a dirt vacuum if it is possible. By the way, never choosing those loose clothes or wearing jewelry to avoid unwanted accidents may be occurred. If your hair is long, you should keep it under your hat.
The cuts should be begun and ended safely
If the router’s bit is in connect with workpieces, you should not start it up because you may lose your control of the device while carrying out the freehand work. In the case of a router table, the workpieces are flung with amazing speed and force I addition to the shank of the bits is bent and in the most serious cases, it is the router damages. If you have just finished the cuts, you should ensure that the bit has been already clear of the work prior to turning the device off. If you are using the router freehand, it is better to wait until the bit stop moving to switch it off.